| SEMICONDUCTOR | ||||
| JOB TITLE - Please click on the Job Title to review the full job description. | MINIMUM EDUCATION / KEY WORDS | LOCATION | COMPENSATION | |
| ASIC / FPGA Principal Design Verification Engineer FPGA | REMOTE FROM HOME POSSIBLE - EXPERT
LEVEL SYSTEM VERILOG AND UVM EXP, LEADING DESIGN VERIFICATION TEAMS • A Master or BS degree in EE/CS with 10+ years of industry experience in ASIC / FPGA design verification • Hands-on experience in the entire verification process, from test plan to block and system level simulation, using standard EDA tools (Cadence Incisive suite and/or Mentor Questa) • Experience with complex SOC UVM and related verification methodologies and tools • Hands-on experience with Block level and System level tests writing for FPGA / ASIC designs • Experience with code coverage methodology • Domain expertise in standard bus protocols: AXI, PCIe, DDR (Must have minimum of 2 out of 3); Experience with 1 of the following SPI, LVDS, I2C, or SERDES, is a plus • FPGA-based co-simulation, and emulation platforms for Design Verification • Working knowledge of SystemVerilog & Object Oriented techniques • Scripting languages such as Perl, Python, Shell • Solid debugging and problem solving skills |
Please Call | Please Call | |
| Refurbishment & Field Service Engineer, Bonders and Aligners, Photolithography | Maintenance
experience with PECVD systems, Plasma Etch systems, or PVD systems could part
of the skills we need. Two year electronics degree or five years wafer fab
equivalent work experience required. BSME or BSEE preferred. Trouble shooting and component board level repair a plus. Precision mechanical repair a plus. Trained on EVG and/or Suss Bonder and Aligners or similar semiconductor wafer equipment |
Please Call | Please Call | |
| Veeco / MOCVD equipment Engineer/Technician needed | Minimum
of 5 years’ experience in field service, applications engineering, or
customer support in a high-tech manufacturing environment relevant electrical
and mechanical systems. Vacuum process equipment experience preferred. Education, a degree would be nice, B.S. degree in a technical field (ME,EE) preferred, or extensive experience |
Please Call | Please Call | |
| Analog Design Engineer | Strong
knowledge of analog integrated circuit design fundamentals CMOS operational amplifier design skills Discrete time and continuous time signal processing skills Expert knowledge in delta sigma data converter design |
Please Call | Please Call | |
| Digital Design Engineer | Required
Skills and Qualifications Master's or PhD in Electrical Engineering and 7+ years of experience in digital system design Working knowledge of Verilog RTL language Working knowledge of digital design flow from architecture, RTL design, verification, and synthesis Working knowledge of USB Type-C, USB 2.0, and USB Power Delivery 3.0 protocols Understanding of SERDES PHY components, PLLS, DLLS, TX, RX, etc Understanding of control theory and discrete time, z-domain, signal processing techniques Understanding of clock and data recovery circuits |
Please Call | Please Call | |
| Automotive Power and Semiconductor Engineer | requires
at least 3 years of Automotive engineering experience related to power and
semiconductor applications. • Strong knowledge in EV and Lithium-ion battery development, integration and test. • Experience in AC-DC, DC-DC, and DC-AC converter/inverter verification and test. • Understanding of power electronics control algorithms and firmware development, electronics hardware development for laboratory control and data acquisition systems. • Understanding of power semiconductor test for (IGBTs, FETs, Diodes, SiC devices, GaN) devices. • Knowledge in programming/scripting languages including C, C++, C#, Python, Perl, Matlab and Labview for use in measurement instruments automation. • This is a field application engineering position and candidate must be able to drive company provided vehicle and physically fit to be able to transport test equipment to/from customer site. • BS/MS in Electrical Engineering or equivalent education with emphasis in Automotive RF and microwave systems. • candidates must be a US Citizen or Permanent Resident. |
Please Call | Please Call | |
| Automotive RF Application | requires
at least 3 years of Automotive engineering experience related to RF/Microwave
applications. • Strong knowledge in EMI/EMC, TPMS, RKE, E-Call, Automotive Radar, SiriusXM and Bluetooth. • Understand measurement and verification challenges with (Over-the-Air, Smart antenna concepts, and Beam steering techniques). • Knowledge in programming/scripting languages including C, C++, C#, Python, Perl, Matlab and Labview for use in measurement instruments automation. • This is a field application engineering position and candidate must be able to drive company provided vehicle and physically fit to be able to transport test equipment to/from customer site. • BS/MS in Electrical Engineering or equivalent education with emphasis in Automotive RF and microwave systems. • candidates must be a US Citizen or Permanent Resident. |
Please Call | Please Call | |
| Precision Opto-Mechanical Design Engineer | We
have 2 different level Opto Mechanical Engineers. Mid and Sr. Level (5-7
(90K-124K) and 8-10 years ($115K - $150K) of experience). • BS in Mechanical
Engineering or related technical field (Materials Science, etc) or equivalent
combination of training and experience • Minimum 7+ years of mechanical design experience for products and/or tool development • Expertise in one or more of the following technical areas: kinematic design, optics, adhesives, vacuum, and precision machining. • Self-starter able to think and act independently to translate general objectives into tangible results, with a record of delivering successful designs on schedule to meet market requirements. • Proficiency in using ME CAD tools for design and FEA for analysis. (PTC Creo and ANSYS preferred) |
Please Call | Please Call | |
| Electrical FPGA Design Engineer, VHDL, 6 openings | BSEE,
Computer Engineering. or other related technical field of study. 6+ years of relevant experience Knowledge of High Complexity Digital Design Techniques and Devices. Hardware debugging skills & experienced in operation of Signal Generator, Logic Analyzer, Digital Oscilloscope and Embedded FPGA Debugging tools |
4 Locations - Please Call | Please Call | |
| Electrical Engineer - FPGA Design/DSP 2 Openings | B.S
degree in electrical engineering with 10+ years or related experience (or 8+
years experience including a Master's degree) Preferred/Additional Skills: DoD Secret security clearance Experience with high-speed, heavily pipelined data path designs Familiarity with high-speed memory architectures such as DDR3/DDR4 In-depth knowledge of the C66xx/C67x architectures In-depth knowledge of the C66xx/C67x architectures - detailed understanding of PCIe gen 3, SPI, SRIO, and McBSP… Familiar with Gigabit/10 Gigabit Ethernet Knowledge of memory caching architectures; experience with the configuration and utilization of the on-chip memory, DRAM, EMAC,EDMA… |
Please Call | Please Call | |
| Electrical Engineer - FPGA Designer 2 Openings | BS
Degree in electrical/computer engineering 10+ years of related experience (or 8+ years of related experience with a Master's degree) Additional Preferred Qualifications: Ability to obtain TS SCI Secret security clearance Experience with Avionics designs Experience with high speed memory interfaces (DDRx) Experience with high speed serial protocols (PCI Express, SRIO, Ethernet) Experience designing with Northwest Logic Gen 3 PCIe and 3rd Party DDR3 cores |
Please Call | Please Call | |
| Acoustic Systems Engineer | Bachelor’s
degree in Electrical Engineering or similar and 3+ years of experience in
digital audio signal processing and/or acoustics development for voice and
audio applications Expertise in MATLAB programming and data acquisition Proficiency in digital filter design and related signal processing techniques Strong hands-on experience conducting audio and acoustic measurement and analysis |
Please Call | Please Call | |
| Design Verification Engineer | Requires a MSEE/MSCS and 5 years of verification experience preferably in mixed signal products. Strong background with HDLs (e.g. Verilog, VHDL) and HVLs (e.g. SystemVerilog/OVM, UVM, AVM, Vera, e) required. The candidate must have solid scripting skills with Matlab, Perl, Unix/Linux shell, TCL, and must be able to write and debug analog behavioral models in Verilog, Verilog-A, and/or Verilog-AMS | Please Call | Please Call | |
| DFT Manager Design For Test | Possess
strong hands on working knowledge on ASIC DFT design and verification Expertise in industry standard EDA tools for DFT such as DFTAdvisor, Fastscan, TestKompress, Tetramax, Test Compiler etc Understanding of ATE and test engineering IEEE JTAG standards e.g. 1149.1/P1687 IJTAG Experience with tool and flow automation |
Please Call | Please Call | |
| Digital/DSP Design Engineer | MSEE plus 7+ years experience. Extensive experience with digital design using disciplined design methodologies and latest EDA tools. Knowledge of state machines, circuits and signal processing datapaths, including FIR/IIR filters. | Please Call | Please Call | |
| DSP Firmware Engineer | 7+
to 10 years experience Seniority Level - Mid-Senior Minimum Education - Master's Degree Willingness to Travel - Occasionally MUST HAVE written algorithms for a DSP working for a semiconductor design company |
Please Call | Please Call | |
| Physical Design Engineer | Bachelor's
or Master's in Electrical Engineering and 4+ years of industry experience in
a Logic design or Physical Design position Candidate should have strong knowledge of RTL design and must be familiar with RTL compiler/Design Compiler, ICC/SOC Encounter Candidate should have Primetime, Conformal LEC, and ATPG Candidate will also have working knowledge of scan insertion, and ATPG |
Please Call | Please Call | |
| Senior Digital Design Engineer | 8+ years of technical experience in digital system design and a PhD or Master's degree in Electrical Engineering Working knowledge of Verilog RTL language Working knowledge of digital design flow from architecture, RTL design, verification, and synthesis Understanding of control theory and discrete time, z-domain, signal processing techniques Familiarity with FIR and IIR filter design | Please Call | Please Call | |
| Software Tools Verification Engineer | BSEE
degree or similar with 3+ years of experience in Software development. Digital audio signal processing and/or acoustics development for voice and audio applications. Expertise in MATLAB programming and data acquisition. Proficient in digital filter design and related signal processing techniques. |
Please Call | Please Call | |
| Validation Engineer | BS or MS in Electrical or Computer Engineering with 2 years experience in an application or validation engineering role | Please Call | Please Call | |
| Senior MBE Engineer | M.S.
or Ph.D. in Physics, Electrical Engineering, Material Science or other
relative science based discipline. Equivalent epitaxial growth experience
will be considered (minimum 5 years) Min 3 yrs experience with MBE growth of group III/V semiconductor is required although 3-5 yrs experience with production MBE growth of group III/V semiconductors is preferred. Excellent understanding of semiconductor growth |
Please Call | Please Call | |
| GaN Sr. Process engineer | Must meet ITAR restrictions, US Citizen, Green Card holder, as there are A LOT of government contracts within this particular line of work. 5+ years in MOCVD growth or research. | Please Call | Please Call | |
| GaN Technology Manager | Four-year
degree in Science or Engineering or equivalent experience necessary to
perform job responsibilities (advanced degree is highly preferred). Plus a
minimum of five years epitaxial growth experience. Fluent understanding of III-Nitride semiconductor growth by MOVPE Fluent understanding of crystal growth equipment and impact of epitaxial growth processes on device performance Proficiency with materials characterization techniques for wide bandgap semiconductors Familiarity with III-Nitride semiconductor device fabrication and device testing Advanced understanding of semiconductor physics and the theory of III-Nitride semiconductor devices |
Please Call | Please Call | |
| Quality Engineering Manager | Degree
qualified. Extensive experience working in Quality Management, Improvement, Control and Assurance. Working Knowledge of Advanced Quality & Continuous Improvement tools. Experience in implementing and Managing Quality Accreditation. |
Please Call | Please Call | |
| Refurbishment & Field Service Engineer, Plasma Etch | Two
year electronics degree or five years wafer fab equivalent work experience
required. BSME or BSEE preferred. Trouble shooting and component board level repair a plus. Precision mechanical repair a plus. Trained on Plasmatherm, Oxford , SPTS, or other semiconductor wafer equipment |
Please Call | Please Call | |
| Refurbishment & Field Service Engineer, Plasmatherm, Oxford , SPTS, or other wafer equipment | Two
year electronics degree or five years wafer fab equivalent work experience
required. BSME or BSEE preferred. Trouble shooting and component board level repair a plus. Precision mechanical repair a plus. Trained on Plasmatherm, Oxford , SPTS, or other semiconductor wafer equipment |
Please Call | Please Call | |
| Equipment Technician for SPTS/Oxford/Plasmatherm | At
least 3-4 years experience in similar position Computer literacy and experience with MS Word and Excel required Must be able to work overtime when required |
Please Call | Please Call | |
| Equipment Technician, KLA-Tencor Surfscan | Two
year electronics degree or five years equivalent work experience. Military
training a plus. Trouble shooting and component board level repair a plus. Precision mechanical repair a plus. Trained on KLA-Tencor semiconductor wafer inspection products a plus |
Please Call | Please Call | |
| Customer Service Liaison (CSL) | Require an associate's degree or its equivalent and 3-4 years of experience in a related field or position. | Please Call | Please Call | |
| GaN Engineering Manager | 5+
years in III-V epitaxial material growth, including solid understanding of
equipment and process. 2+ years in engineering management. Solid SPC experience (JMP a plus) |
Please Call | Please Call | |
| Development Engineer - EPI/ EPI Process Engineer (epitaxial) | EDUCATION
REQUIREMENTS Minimum of a BS in Physics or Material Science or related engineering field. OTHER SKILL REQUIREMENTS Requires a creative self-motivated individual who seeks out solutions to the challenges associated with the position and drives these solutions through to completion. Strong organizational skills; demonstrated ability to manage multiple tasks simultaneously and able to react to shifting priorities to meet business needs First-hand experience with wafer fab processing equipment such as FTIR, Four Point Probe, SRP, and Hg Probe. Outstanding communication skills Demonstrated ability to meet strict deadlines and commitments PREFERRED EXPERIENCE - Background in solid state physics or material science a plus |
Greater KC Area | Please Call | |
| Device Design Engineer | 7+ to 10 years with specific experience in discrete device design - with experience in rectifiers, diodes, transistors, device...etc.. Master, PhD preferred -Software experience with Silvaco modeling and/or Patent Portfolio is a plus | Greater KC Area | Please Call | |
| Diffusion Process Engineer | Minimum
of BS degree in Engineering OTHER SKILLS REQUIREMENTS: Minimum 5 years’ of hands-on semiconductor processing or related manufacturing experience. Familiarity with operation of BTI horizontal furnaces and Apex control systems, Applied Materials RPCVD, FSI Mercury Spray Acid tools, transfer tools and related metrology. Experience in Diffusion/Oxidation, Anneal, CVD and PECVD plasma processing and high vacuum systems. Hands-on experience with semiconductor processes |
Greater KC Area | Please Call | |
| Digital Engineer (ASIC, CPLD, FPGA) | •BS
or MS in Electrical Engineering or related field along with 1-2 years digital
engineering experience. •1+ years hardware debugging which includes use of Signal Generator, Logic Analyzer, Digital Oscilloscope, JTAG and Imbedded FPGA Debugging tools; •Ability to obtain a security clearance. |
California | Please Call | |
| Director of Capital Efficiency | B.S.
Degree in Physics, Material Science, Engineering, Chemistry or other relevant
area Minimum of 12 years of semiconductor financial or process/equipment engineering experience Minimum of 5 years of experience managing in a semiconductor fab or within a technology development organization hands on working with tools technical or financial information |
Call | Please Call | |
| Director of Engineering | Bachelor
degree or higher in Engineering related field (Physics, Material Science,
Electronics) Minimum 5 years of semiconductor process / equipment engineering experience Minimum 3 years of experience managing in a semiconductor fab |
Greater KC Area | Please Call | |
| EHS and Facilities Supervisor | Bachelor’s
Degree 3 years’ experience in a similar role |
Greater KC Area | Please Call | |
| Embedded Software Engineer | The Ideal Candidate Ideal candidate will have a minimum of five years recent experience in small system embedded firmware deployment and small system RTOS kernel experience as well as MQX RTOS and embedded Linux experience. | Rhode Island | Please Call | |
| Employee Relations Manager | Desired
Qualifications: Legal background, experience or education Experience working directly with a U.S. union workforce Experience in a start-up company environment MBA We will be required to comply with OFCCP requirement This will fall under this individual and is a significant part of their responsibility. |
East Fishkill NY, Essex Junction VT or Saratoga Springs NY | Please Call | |
| Engineer, Senior or Principal- Electronic | EE
PhD or MS with minimum 6+ year working experience in high-speed broadband
communication post-silicon analog test environment. Must be an expert in PHY test methodologies specified in at least one of above listed IEEE standards. |
California | Please Call | |
| EPI Process Engineer (epitaxial) | •Minimum
of a BS in Physics or Material Science or related engineering field. •Requires a creative self-motivated individual who seeks out solutions to the challenges associated with the position and drives these solutions through to completion. •Strong organizational skills; demonstrated ability to manage multiple tasks simultaneously and able to react to shifting priorities to meet business needs •First-hand experience with wafer fab processing equipment such as FTIR, Four Point Probe, SRP, and Hg Probe. •Outstanding communication skills •Demonstrated ability to meet strict deadlines and commitments |
Greater KC Area | Please Call | |
| Equipment Engineering Mgr / Maintenance Manager | BS in technical field plus 10 years progressive management experience in a manufacturing environment or MS in technical field plus 5 years progressive management experience in a manufacturing environment. | Greater KC Area | Please Call | |
| Fab Staff Recruiter | Bachelors
Degree in Human Resources, Engineering, Business, or related field Minimum 7 years talent acquisition experience preferably in a high volume manufacturing environment Strong proficiency in MS Office Suite, specifically Excel and Word |
Albany, New York | Please Call | |
| Facilities Specialist Gas Engineer | Bachelor’s
degree in Chemical or Mechanical Engineering Minimum 15 years of Operation and Maintenance of Gas Generation and Distribution Systems. Minimum 10 years’ experience in Operation and Maintenance of Gas generation and distribution systems for Semiconductor Fabrication Plants. Analytical skills to trouble-shoot Specialty Gas Systems. |
Saratoga Springs, NY | Please Call | |
| Implant or Diffusion or Metals or Etch Process Engineers | 5+ to 7 years of experience Minimum Education - Bachelor's Degree | Greater KC Area | Please Call | |
| Lead Engineer | •Bachelor
of Science degree in Electrical or Mechanical Engineering, •MSME or MSEE degree is a plus, •7+ years experience relevant work experience. |
North Carolina | Please Call | |
| Maintenance Supervisor - Diffusion, Implant or Metals | Equipment
supervisor with experience in Diffusion, Implant and Metals (not necessarily
all three). 10 years as a Maintenance Technician or similar experience Preferred: Supervisory experience Associates Degree |
Greater KC Area | Please Call | |
| Maintenance Supervisor - Equipment Supervisor -Photolith/etch | Experience
in etch AND (Photolithography OR Photo-lithography OR "Photo
lithography" OR Photo OR litho OR lithography) and thinning 10 years as
a Maintenance Technician or similar experience Associates Degree |
Greater KC Area | Please Call | |
| Manufacturing Shift Supervisor, Production Supervisor | Exp in a wafer fab required High school graduate or equivalent Experience as a Production Supervisor or Lead Operator in a similar role in the semiconductor industry in a wafer fab facility. |
Greater KC Area | Please Call | |
| Mechanical Engineer – Facilities Design & Engineering | The
candidate should be experienced in FAB Mechanical systems (e.g. Boilers,
HVAC, Exhausts, Vacuum Systems, Cleanroom Design, and related systems). BS Degree in Mechanical Engineering or closely associated discipline Minimum of 10 years of Semiconductor Facilities Operations experience Demonstrated advanced experience in Semiconductor Facilities Mechanical Systems design and operations |
Saratoga Springs, NY | Please Call | |
| Mechanical Project Engineer | Education:
Bachelor of Science Degree in Mechanical Engineering Experience: Minimum 3 years engineering design experience in a Manufacturing environment Special Training: 3D CAD (Pro|Engineer preferred) Candidates with Project Management experience and presentation skills will be given preference. Specific skills and experience in addition to those listed above may be required for specific positions. |
Alabama | Please Call | |
| Metals/Thinning Process Engineer | Minimum
of 5 years in semiconductor wafer processing or similar manufacturing
environment. Familiarity with standard industry practices. Experience in plasma processing, high vacuum systems, PVD, and a strong mechanical background are preferred. Familiarity with Varian 3180, 3190, 3280 and 3290 sputter tools, Anelva evaporators, Endura 5500, MatVac 943 and related metrology equipment. Semiconductor experience with Schottky, Planar PN Junction, and MOSFET Devices is preferred. |
Greater KC Area | Please Call | |
| MTS Advanced Node Process Design Engineer | 7+ to 10 years of experience Minimum Education - Bachelor's Degree Willingness to Travel - Occasionally | California | Please Call | |
| Photo/Etch Process Engineer - Photolithography Process Engineer | EDUCATION
REQUIREMENTS: Minimum of BS degree in Engineering, Chemistry or Physics OTHER SKILLS/REQUIREMENTS: Must be able to design experiments and make recommendations/process changes based on results Hands-on experience with semiconductor processes Familiarity with SVG coater and developer tracks, Canon MPA, Canon i3 and i4 steppers, Semitool Sirius Ozone Stripper, Semitool SAT, P5000 Dry Etcher Strong communication skills and collaborative ability across all operational levels Solid problem solving and analytical skills PREFERRED EXPERIENCE: Semiconductor experience with Schottky, Planar PN Junction, and MOSFET devices is preferred. |
Greater KC Area | Please Call | |
Photo/Etch Process Engineering Section Manager |
Bachelor’s
in Engineering or Physics. Master’s
preferred. 7+ years’ experience in the semiconductor industry. Hands-on experience with semiconductor wafer processing equipment and materials, highly preferred, including; SVG coater and developer tracks, Canon MPA, Canon i3 and i4 steppers, Karl Suss, Semitool Sirius Ozone Stripper, Semitool SAT, Lam and P5000 Dry Etcher, Disco Polisher, Advantek Laminator, Lintec Delaminator, and Wet Etch processing. In depth understanding of Optics and/or chemical process specific to lithography and etch. Strong comprehension of SPC, FMEA methodology, DOE, FA, etc. |
Greater KC Area | Please Call | |
| Photolithography Process Engineer | Minimum
5 years of semiconductor processing or related manufacturing experience.
Familiarity with SVG coater and developer tracks, Canon MPA, Canon 2500 i3 stepper, Semitool Sirius Ozone stripper, Semitool SAT, P5000 Dry Etcher, Varian 180XP and E500 implanters. Semiconductor experience with Schottky, Planar PN Junction, and MOSFET Devices is preferred. |
Greater KC Area | Please Call | |
| Process Engineering Section Director or
Manager - EXP IN Wafer, WLP, wafer
level packaging(NEW) OR Photolithography and Etch (wet AND dry) OR Metal Deposition and Thin films -2 openings |
EDUCATION
- BS; Electrical, Chemical or Physics etc EXPERIENCE - 5+ years in Manufacturing, Semiconductor Photolithography & Etch (wet & dry) or Metal Deposition & Thin films |
Greater KC Area | Please Call | |
| Product Engineer | Minimum of 3-5 years in Semiconductor development and process integration. Strong background in semiconductor device physics and silicon wafer processing. Familiarity with standard industry practices. Experience in discrete bipolar transistor and Schottky diode production is required. | Greater KC Area | Please Call | |
| Product Engineer | Minimum
of MS in Engineering. PhD in Electrical engineering is highly
desirable. Hands on experience of product yield enhancement is highly desirable Familiarity with Semiconductor development and process integration Strong background in semiconductor device physics and silicon wafer processing Familiarity with standard industry practices Experience in discrete, bipolar, transistor, and Schottky diode production and electrical testing methods. Excellent communication skills and aggressive in driving change Expert knowledge of Windows, Excel, PowerPoint, and Word software |
Greater KC Area | Please Call | |
| Quality Engineer | Bachelor’s
Degree 3 years’ experience in a similar role |
Greater KC Area | Please Call | |
| Semiconductor Equipment Technician or Engineer - NEEDED - ALWAYS HIRING | DIM (Diffusion, Implant, Metals)
BRUCE OR NOVELLUS OR Key Words - Implant E500, NV10, XPI80 (for one of the openings) Key Words - Metals Varian 3290's and 3280's and 3180's and 3190's (for one opening) ALSO, Diffusion OR Implant OR Metals OR Varian OR E500 OR NV10 OR “nickel vanadium” OR XP180 OR 3290 OR 3280 OR WLP (Wafer Level Packaging) Key Words – bump, Pacline 300 A50 is the specific name of the plater that we need specific experience on. Experience in Epi is considered a plus but is not a requirement. OR PETP (Photo, Etch, Thinning, Probe) Key Words - MPA, Semitool Ozone, Disco DFG 8540, Applied Materials P5000, Canon i3/i4 Stepper, Electroglas Probers (these are key words for both positions) Hands-on experience with semiconductor wafer processing equipment and materials, highly preferred, including; SVG coater and developer tracks, Canon MPA, Canon i3 and i4 steppers, Karl Suss, Semitool Sirius Ozone Stripper, Semitool SAT, Lam and P5000 Dry Etcher, Disco Polisher, Advantek Laminator, Lintec Delaminator, and Wet Etch processing. In depth understanding of Optics and/or chemical process specific to lithography and etch. OR Always needed, Diffusion, Implant, Electronics, Varian, AMAT, CVD, Thin Films, Metal Deposition, RTA, Centura, Novellus, Concept One, Bruce Furnace, TEL, SVG, Thermco, Endura, 3180, 3190, 3280, 3290, steppers |
Greater KC Area | Please Call | |
| Semiconductor Equipment
Technician or Engineer - EPI/WLP Wafer Level Packaging / EPI, Epitaxial, Epitaxy |
EDUCATION
REQUIREMENTS: •Minimum of an Associate degree in Electronics Engineering Technology, Bachelor degree preferred or extensive equipment experience and a HS Diploma or GED. •Military Electronics in lieu of an Associate degree is also acceptable with the right tool experience. OTHER SKILL REQUIREMENTS: •Ability to work overnight shifts on a compressed schedule which may include weekend nights •Previous experience in maintenance, repair, and troubleshooting of equipment •Thorough understanding of vacuum, RF, AC/DC, PLC and digital electronic theory •The ability to assemble, disassemble and reassemble complex mechanical assemblies •Strong work ethic, positive attitude, punctual with a superior good attendance record PREFERRED EXPERIENCE: •Experience in a semiconductor manufacturing plant specifically working in the EPI or WLP process area on AMAT Centura, ASM Epsilon, EpiPro, Compression Mold, Plating tool sets, highly preferred however, will train the right candidate. |
Greater KC Area | Please Call | |
| Semiconductor Process Development Engineer | 7+
to 10 years of experience Minimum Education - Bachelor's Degree Willingness to Travel - Occasionally |
Oregon | Please Call | |
| Senior Compensation Manager | Bachelor’s
Degree 10 plus years of increasingly responsible experience in broad based compensation Previous supervisory experience and dedication to being a superb people manager Extensive knowledge of compensation best practices and relevant law/regulations |
Essex
Junction, VT East Fishkill, NY Hopewell Junction, NY Saratoga, Springs, NY |
Please Call | |
| Senior Electrical Design Eng | 7+
to 10 years of experience Minimum Education - Bachelor's Degree have 8 to 10 year of recent experience in Electrial Engineering-Please give examples of work U.S Citizen or a Permanent Resident have relevant knowledge of CAD? Skills and Certifications (required) • Experience in reading and understanding software written in C. Solid understanding of processes required to design cost effective system solutions for consumers. |
Rhode Island | Please Call | |
| Senior Electronic Engineer Analog and Digital Design | 5+
to 7 years of experience Minimum Education - Master's Degree |
Arizona | Please Call | |
| Senior Electronics Engineer | 5+
to 7 years of experience Minimum Education - Bachelor's Degree |
Washington | Please Call | |
| Senior Embedded Linux Engineer | Education: BS or higher in Computer Science/Engineering (or equivalent) Willingness to Travel - Occasionally Minimum of five years recent experience in embedded Linux development, assembling Linux BSPs, portin Experience with creating or customizing Linux drivers for embedded applications is required. Experience building custom x86, PPC and ARM Linux kernels and creating and applying patches is required Expert in C and C++ and scripting languages (Perl, Python, bash). Sockets, TCP/IP, secure SSL/SSH communications and web services programming experience is required Experience with GNU and Eclipse based tool chains is required |
Rhode Island | Please Call | |
| Senior Manager Talent Acquisition/Staffing | Required
Qualifications: •B.S. / B. A. Degree in Human Resources, Business, Engineering, or related field. •Minimum 15 years of progressive Human Resources leadership experience •Minimum 10 years staffing/ recruiting experience in a technical or engineering business. •Demonstrated experience in a position with significant interaction with executive level leadership; proven ability to lead and influence at high levels within the organization. •Experience in developing and implementing staffing processes for a multi-national company. •Strong analytical and systems skills; familiarity with staffing systems and online/web-based search engines and staffing tools. |
Saratoga Springs, NY | Please Call | |
| Senior Manufacturing Test Engineer | Education:
Bachelor of Science degree in Engineering or Computer Science Experience: Minimum 5 years of related engineering experience in development of Test Systems using LabView and TestStand. |
Alabama | Please Call | |
| Senior Semiconductor Packaging Engineer | 7+
to 10 years of experience Minimum Education - Master's Degree Willingness to Travel - Often |
California or Michigan | Please Call | |
| Senior Wastewater Treatment Design Engineer | B.S.
Degree in Chemical Engineering or other related field or equivalent
experience. Experience Wastewater processes, specification and products. Demonstrated knowledge of construction standards, practices, techniques, and technology. Strong analytical skills Minimum 10 years of large project and construction experience with strong results in meeting process requirements, deadlines and cost requirements Demonstrated OEM negotiation experience in a new construction environment. |
Saratoga Springs, NY | Please Call | |
| Snr Facilities Engineering Manager | BS
Degree in Mechanical Engineering or closely associated discipline Minimum of 10 years of Semiconductor Facilities Operations experience Demonstrated advanced experience in Semiconductor Facilities Electrical, Mechanical, Gas and Water Systems design and operations |
Saratoga Springs, NY | Please Call | |
| Snr Ultrapure Water Design Engineer | B.S.
Degree in Chemical Engineering or other related field or equivalent
experience. Experience with Ultrapure Water processes, specification and products. Demonstrated knowledge of construction standards, practices, techniques, and technology. Strong analytical skills Minimum 10 years of large project and construction experience with strong results in meeting process requirements, deadlines and cost requirements Demonstrated OEM negotiation experience in a new construction environment. |
Saratoga Springs, NY | Please Call | |
| Sr. Electrical Project Engineer I | Bachelor
of Science or Master of Science degree in one of the following disciplines:
Electrical Engineering, Mechanical Engineering, Computer Science, Computer
Engineering 7 years in Engineering product design and development. (5 years of experience for candidates with a Master of Science degree.) 5 years of embedded C or Assembly programming 2 years of LabView experience |
Alabama | Please Call | |
| Sr Engineer, Electrical | 5+
to 7 years of experience Minimum Education - Bachelor's Degree Willingness to Travel - Occasionally |
Minnesota | Please Call | |
| Sr HR Business Partner | 10+
to 15 years of experience Management Experience Required - Yes Minimum Education - Bachelor's Degree Willingness to Travel – Occasionally |
California | Please Call | |
| Sr. Manager Yield Solutions Group | 10+
to 15 years of experience Minimum Education - Master's Degree Willingness to Travel - Occasionally |
NY State or GERMANY | Please Call | |
| Sr. OPC-RET Engineer Optical Proximity Correction (lithography) | BS
degree, minimum 6 years or Masters plus 5 years or PhD plus minimum 3 years
industry-related engineering or science degree. 5 or more years of lithography and/or OPC experience. Working knowledge of industrial grade OPC/Lithography software. |
New York | Please Call | |
| SRAM Device Technologist | 5+
to 7 years of experience Minimum Education - Master's Degree Willingness to Travel – Occasionally |
New York/California/Texas | Please Call | |
| Technology Development Integration Engineer | 5+
to 7 years of experience Minimum Education - Bachelor's Degree |
Oregon | Please Call | |
| Technology Development Project Leader | 10+
to 15 years of experience Must be a US citizen or a permanent resident, visa candidates will not be considered. |
Oregon | Please Call | |
| Wafer Level Packaging Development Engineer | BS/MS
in Electrical Engineering Familiarity with Semiconductor production regarding Test and Process CSP Experienced problem solving methodologies such as DOE, 8D or PDCA 5 – 10 years industry experience in a similar role |
Greater KC Area | Please Call | |