Semiconductor Equipment Technician or Engineer (Multiple
Openings)
Greater KC Area –
Not too long ago CNN/Money and Money magazine
ranked this location/town 44th on its list of the 100 Best Cities to reside in
the United States. The ranking improved to 27th more recently as well
Benefits - Full, begin the first day
Relocation Assistance Available - Yes
Bonus Eligible - Yes
Interview Travel Paid - Yes
DIM (Diffusion, Implant, Metals)
BRUCE OR NOVELLUS OR
Key Words - Implant E500, NV10, XPI80 (for one of the openings)
Key Words - Metals Varian 3290's and 3280's and 3180's and 3190's
(for one opening)
ALSO, Diffusion OR Implant OR Metals OR Varian OR E500 OR NV10 OR
“nickel vanadium” OR XP180 OR 3290 OR 3280
OR
WLP (Wafer Level Packaging)
Key Words – bump, Pacline 300 A50 is the
specific name of the plater that we need specific experience on. Experience in
Epi is considered a plus but is not a requirement.
OR
PETP (Photo, Etch, Thinning, Probe)
Key Words - MPA, Semitool Ozone, Disco
DFG 8540, Applied Materials P5000, Canon i3/i4 Stepper, Electroglas
Probers (these are key words for both positions)
•Hands-on experience with semiconductor wafer processing
equipment and materials, highly preferred, including; SVG coater and developer
tracks, Canon MPA, Canon i3 and i4 steppers, Karl Suss,
Semitool Sirius Ozone Stripper, Semitool
SAT, Lam and P5000 Dry Etcher, Disco Polisher, Advantek
Laminator, Lintec Delaminator, and Wet Etch
processing.
•In depth understanding of Optics
and/or chemical process specific to lithography and etch.
OR
Always needed, Diffusion,
Implant, Electronics, Varian, AMAT, CVD, Thin Films, Metal Deposition, RTA, Centura, Novellus, Concept One, Bruce Furnace, TEL, SVG, Thermco, Endura, 3180, 3190,
3280, 3290, steppers
Then again the above with
the following below in the overall job description
Performing complex electrical maintenance on semiconductor
manufacturing equipment, including EPI or WLP;
Troubleshooting a variety of tools for electrical, mechanical or
vacuum issues;
Communicating and coordinating with others to ensure production
requirements are met;
Learning and following all safety policies and chemical handling
guidelines;
Updating schematics, installing retrofits and upgrades as part of
the team.
REQUIRED SKILLS:
One or more years of experience in electronic equipment
maintenance, specifically EPI and/or WLP (wafer level packaging);
Experience performing preventative and corrective maintenance on “platers”;
Experience in electronics, and/or AMAT, CVD, RTA, Endura, SVG, diffusion, thin films, Metal Deposition,
Novellus, Thermco, etc.;
Must be able to lift up to 50 pounds;
Strong attention to detail, good work ethic, and communication
skills;
Willing to work some weekend/night shifts.